How To Reset A Verizon Router

A factory reset is recommended if you need to refresh your network settings. This action will restore your Verizon router to its original settings, which can be helpful when troubleshooting … Read more

Taylor Bell

Taylor Bell

Published on Apr 14, 2024

How To Reset A Verizon Router
A factory reset is recommended if you need to refresh your network settings. This action will restore your Verizon router to its original settings, which can be helpful when troubleshooting a connection issue or starting anew. Keep in mind that all devices connected to your Wi-Fi will lose their connection, requiring you to reconnect them after the reset. Additionally, you will need to set up your router again by establishing a new Wi-Fi name and password.

Verizon offers a variety of router models based on factors like when you obtained your service, the speed, and whether it’s Fios or 5G. While the router software is generally similar across Verizon’s models, there may be some variations. It’s important to be aware of the specific model you have when performing a factory reset to ensure compatibility and proper setup.

These instructions specifically apply to routers purchased or rented from Verizon. If you’re using one of the best Wi-Fi routers for Fios or mesh Wi-Fi systems with Verizon Internet service, the reset process may differ. However, you should still be able to locate the factory reset option by logging into the router’s settings.

How to reset a Verizon router

The easiest and quickest way to rest your Verizon router is by using the reset button on the router itself. Located on the back of the router near the network and power connection, there’s a pinhole button, often labeled Reset.

  • Find the Reset pinhole on the back of your Verizon router.
  • Insert a pin or toothpick in the hole and press and hold the button for ten seconds.
  • Wait for the router to power back up
  • Some models don’t need a full 10 seconds for the factory reset and will reset after five seconds. On some models, like the fast CR1000 models, if you release after three seconds, the router will simply reboot.

    Before turning your router back around, take note of the information on the sticker on the back of the router. Here you can see the default Wi-Fi name and password. You can also see the address to get to your router settings, along with the access password. It could be helpful to snap a picture with your phone for future reference as well.

    Reset the router using software

    If you want to reset your router from a PC or phone, you can do so using a web browser. You will need the admin password, also called Network Settings Password on some models. This information is printed on the back of your router near the wired connections.

    1. Using a device connected to your network, type mynetworksettings.com (http://my.network on some models) into the URL bar and press enter. You may need to bypass a security warning from your web browser.
    2. Log in to the router software using the admin password found on the back of the router.
    3. Click Advanced at the top of the page near the Verizon logo.
    4. On the left side of the screen, click Utilities.
    5. Under Utilities, click Save and Restore.
    6. Click to select Factory Default.
    7. Click Restore configuration.

    If you want to restore a known good backup, you can load one from the Save and Restore page as well. Once you have your network set up, you can also create a backup. This could be a good option if you’re making changes to your network and want to have a backup plan if something goes wrong.

    You’ll need to set up your router

    When you factory reset a router, you lose all of your past settings. This includes specific settings for devices, your Wi-Fi name, and password. To use the router, you can use the default name and password set by Verizon, but you can also set your own Wi-Fi name and password. Access the router’s settings page by typing in the web address printed on the back of the router. A setup assistant will guide you through the process. You will need the admin password printed next to the web address.

    If you want to let your friends use your Wi-Fi without giving them full access to your network, set up Guest Wi-Fi when setting up your router. Some newer Verizon routers also support IoT networks. Like Guest Wi-Fi, this acts like a separate Wi-Fi network for IoT devices that can use the more compatible 2.4GHz band and keeps these devices off of your accessing your local devices.

    Partager cet article

    Articles Connexes

    Apr 14, 2024

    The Flipper Zero

    The Flipper Zero is essentially a Swiss army knife of hacking, and that’s great because it draws attention to how insecure some of the world around us can be. One...

    Inscrivez-vous à notre newsletter